Customized high-precision laser-cut solder paste stencils can be delivered together with your PCBs. Fully optimized by our CAM engineers, we can assure seamless production; we support all known stencil-framing on the market. After careful preparation of stencil data, resizing and modifications of the apertures, and finally, the thickness of the stencil are done.
After careful preparation of stencil data, resizing and modifications of the apertures and finally, the thickness of the stencil are done. Different customers’ special requests are activated and reused in future stencil orders. If you want, you get a file for review before starting. We also provide a file for SPI if you have an optical inspection after the solder paste print. Note that our manufacturer produces over 40,000pcs stencils each year for over 800 customers, mainly in Germany.
More about solder paste stencils in our blog post.
Stainless steel grade 304 Full hard
– Tensile: 1329 N/mm²
– Elongation: 5.0%
– Hardness: 408 HV
Fine grain (substitute for Nickel alloy)
– Tensile: ? 1000 N/mm²
– Elongation: 5.0%
– Hardness: 370 HV
VectorGuard stencils
Dimensions:
– 23″ x 23″
– 23″ x 29″
– 29″ x 29″
Thicknesses (µm):
80, 100, 120, 130, 150, 180, 200, 250
Dimensions :
– 22″ x 22″ (555 x 555 mm)
– 23″ x 23″ (584 x 584 mm)
– 29″ x 29″ (736 x 736 mm)
– 400 x 500 mm
– 550 x 650 mm
Thicknesses (µm):
80, 100, 120, 130, 140, 150, 180, 200,
250, 300
– Step down to 80um thickness
– Step up to 300um thickness
– Positional tolerance for steps less than 10um
– Axial precision +/- 2um
– Material tolerance +/- 2%
– Material: Standard sus 304, Fine grain
Applications:
Vectorguard stencils
Standard stencils for self-tensioning frames
Aluminium framed stencils (size up to 736 x 736)
Prototype stencils
Max dimensions 200 x 300 mm
Up to 736 x 1800mm
Thicknesses (µm):
80, 100, 120, 130, 150, 200
and stencils for via fill
– Classic mechanical polish
– Electro chemical polish
– Nano-Pro Tek coating
– Clean contours with smooth burr free edges
– Conical openings
– Compared to etching technology, our laser cut stencils deliver superior geometry and precison while production is environmental friendly
– 100% scan check inspection for all cutting aperatures
Our definition of “Standard PCB” is a rigid glass-fibre board with one or more layers.
High-dense-interconnect PCBs meet the demand for smaller PCB with more compact components by increasing wiring capabilities.
Flexible printed circuit boards get the name from the ability to be bent in a working application.
RIGID-FLEX PCB excels in overcoming space and weight constraints due to spatial degrees of freedom.
A metal core printed circuit board uses metal as its base material to spread heat accumulated due to some electronic components operating on the board throughout the board.
High-frequency PCBs are often needed while developing high-frequency products, such as satellite systems, radio frequency, microwave, mobile telephone base stations, etc.
PCB prototyping can be the most important step during electronic development.
Let’s get this conversation started. Tell us a bit about yourself, and your needs. We will get back to you within few hours.