Get a quote

Solder Paste Stencils

Customized high-precision laser-cut solder paste stencils can be delivered together with your PCBs. Fully optimized by our CAM engineers, we can assure seamless production; we support all known stencil-framing on the market. After careful preparation of stencil data, resizing and modifications of the apertures, and finally, the thickness of the stencil are done.

We provide laser-cut solder paste stencils from 24h

After careful preparation of stencil data, resizing and modifications of the apertures and finally, the thickness of the stencil are done. Different customers’ special requests are activated and reused in future stencil orders. If you want, you get a file for review before starting. We also provide a file for SPI if you have an optical inspection after the solder paste print. Note that our manufacturer produces over 40,000pcs stencils each year for over 800 customers, mainly in Germany.

Materials

Stainless steel grade 304 Full hard
– Tensile: 1329 N/mm²
– Elongation: 5.0%
– Hardness: 408 HV
Fine grain (substitute for Nickel alloy)
– Tensile: ? 1000 N/mm²
– Elongation: 5.0%
– Hardness: 370 HV

Applications

VectorGuard stencils
Dimensions:
– 23″ x 23″
– 23″ x 29″
– 29″ x 29″
Thicknesses (µm):
80, 100, 120, 130, 150, 180, 200, 250

Glued in aluminium frame

Dimensions :
– 22″ x 22″ (555 x 555 mm)
– 23″ x 23″ (584 x 584 mm)
– 29″ x 29″ (736 x 736 mm)
– 400 x 500 mm
– 550 x 650 mm

Stencils for self tension frames

Thicknesses (µm):
80, 100, 120, 130, 140, 150, 180, 200,
250, 300

Multi-Level Stencils

– Step down to 80um thickness
– Step up to 300um thickness
– Positional tolerance for steps  less than 10um
– Axial precision +/- 2um
– Material tolerance +/- 2%
– Material: Standard sus 304, Fine grain

Applications:
Vectorguard stencils
Standard stencils for self-tensioning frames
Aluminium framed stencils (size up to 736 x 736)
Prototype stencils

Prototype stencil

Max dimensions 200 x 300 mm

Large stencils for aluminium frames

Up to 736 x 1800mm
Thicknesses (µm):
80, 100, 120, 130, 150, 200
and stencils for via fill

Final treatments

– Classic mechanical polish
– Electro chemical polish
– Nano-Pro Tek coating

Advantages with laser cut stencils

– Clean contours with smooth burr free edges
– Conical openings
– Compared to etching technology, our laser cut stencils deliver superior geometry and precison while production is environmental friendly
– 100% scan check inspection for all cutting aperatures

All

Yes. Since we have all kinds of factories, we can offer a wide range of delivery times. Also, many of our volume factories have prototype services in-house, so both prototype and volume will be produced in the factory.

Yes, there are still a lot of PCB manufacturers inside Europe, and we have carefully selected PCB manufacturers as our suppliers for express prototyping, but also a producer of solder paste stencils for PCB soldering. This laser-cut solder paste stencil can be of various types, such as vector guard, zellflex, genesis, and more, but also multi-level stencil.

All deliveries will pass Multi-Teknik quality control, and we check quality with the CAM-prepared data made at the beginning of the process. You will also have a CoC and quality control document along with the delivered PCB.

The straight answer is no. You will have the correct quantity of PCBs and only pay for the correct ones. The x-outs are not considered when counting and will not be included in the amount on the delivery note.

Flex PCB is the same as the ordinary PCB, but with the difference that the base material is flexible. This is to let the circuit be able to be bent during a lifetime or be installed in a static folded mode. There are many design rules to take into account when designing flex PCB.

A PCB (printed circuit board) is a board with a printed copper pattern that forms a given circuit to enable the designer to connect several electronic components rationally. The most common material today for PCB boards is a combination of woven glass fiber and epoxy. For more demanding electronic designs, there are a lot of other base materials, such as ceramics, Teflon, polyimide, aluminum (mcpcb), and more.

The stack-up is the schematic view of how all copper layers, cores, and prepregs are grouped with data regarding thickness and material selections. Often impedance controlled PCB has this data in the stack-up view as well.

There is no exact date for the invention of the PCB; the truth is that it is a line of innovations that together contributed to today’s PCB. Of course, there is endless material about this on the Internet, but we have tried to pinpoint an unambiguous answer.

Mainly in China, where the world’s production is concentrated today, but also in Taiwan and inside Europe.

No one knows why just green became the standard color of PCB solder masks. But the rumor says that the electronic production staff in the USA during the second world war had voted about what colors were most friendly to eyes during a long time of work. And the green has become favorite.

Explore our other products

Learn more how we ensure quality of our products.

Learn more

Contact sales

Let’s get this conversation started. Tell us a bit about yourself, and your needs. We will get back to you within few hours.

Get a quotation

    We will get back to you within few hours